Accounting and Mailing: 4 Little Leaf Cres., Markham ON, L3S 4E9 Canada
Tel. 905-201-7841
Fax. 905-201-7842

New Equipment

HK Laser & Systems Inc. / Laser Cutting Equipment

HK Laser & Systems Inc.
Falcon III Plus

The benefit of 10ft plus 3ft for sheet metal fabricators

#1) When it comes to manufacturing, efficiency is the key to success. One of the many ways to be efficient in the production process is material utilization. It is crucial to use up as much sheet material as possible and minimize the amount of scrap. For most cases, the larger the sheet size, the more efficient the material utilization is. Listed below are standard sheet metal sizes provided in U.S. It is reported that the material utilization for a 60”x144” sheet is approxi- mately 10% higher than 60”x120” size sheet or smaller.

36 x 96, 36 x 120, 36 x 144, 48 x 96, 48 x 120, 48 x 144, 60 x 120, 60 x 144, 60 x 160

#2) When it comes for the need to acquire an oversize laser machine in order to cut oversized parts, the main demand is not for expanded width, but for the length, which is mostly up to 144 inches. It is no longer necessary to acquire an oversize massive laser machine (ex. 4020 model) just to cut longer parts.

Auto Focus Cutting Head**

  • Process monitoring system to monitor the temperatures of all optics, nozzle and electronics at the cutting head
  • Perfect sealing between motorized linear guide and optics chamber to prevent any possible contamination
  • Upper protective window to the collimator, minimizing the risk of contamination of the collimator
  • Easy beam centering check by potable beam center camera

HK Controller

  • High speed controller with Window-based 64MB RAM and high capacity SSD hard disk drive
  • 21” flat touch screen with user-friendly intuitive HMI design
  • Data communication by USB or Ethernet LAN Built-in cutting database library for various materials
  • Easy access to check up the status for laser resonator and cutting head

Beam shaping Technology**

  • Unlike the conventional beam size variation at the cutting head by using extra zoom lenses, HK’s revolutionary solution for beam shaping is that the mode and profile of the fiber laser beam is variable at the laser resonator. This technology eliminates the demand to have a complicated cutting head design for beam shaping.
  • The diameter of laser beam from 0.125mm to 0.350mm
  • No motorized zoom optics at the cutting head
  • No free-space optics coupling at the beam delivery cable
  • 100% power available from a single laser source

Request a Quote






Comment / Message *
Loading...